|
Product Summary
|
| Order Code |
LP103X
|
| Description |
High speed active 3.3V/5V CMOS & TTL logic & analog buffered inputs, 100KΩ/5pF. Includes mini-grabber test clips & LEDs. |
| Comment |
Mini-grabber test clips. |
| Price |
|
Product Information
LP103X is a premium 10 channel mixed signal logic probe compatible with all BitScopes.
It is ideal for surface-mount mixed signal work and is supplied with a set of 10 mini-grabber test clips providing flexible connectivity to almost any type of component, wire and test point.
Logic inputs are uni-polar high speed CMOS compatible with 3.3V and 5V logic levels or standard TTL logic levels. Analog inputs are bipolar 100K/5pF rated to ±12V
| Feature | Specification |
| Bandwidth | DC to 50MHz |
| Logic Channels | 8 |
| Analog Channels | 2 |
| Rise Time | 10nS (typical) |
| Input Resistance | 100KΩ |
| Input Capacitance | 5pF (typical) |
| Maximum Input Voltage [1] | 12V DC |
| Logic Working Voltage [2] | 3.3, 5V CMOS & TTL |
| Analog Working Voltage [2] | ±10mV to 5V |
| Output Power Voltages [3] | 5V & 9V~12V |
| Logic and Power LEDs [4] | YES |
| [1] | This voltage must not be exceeded at the POD input connector. |
| [2] | Direct connection voltage ranges. These may be increased with series resistor. For example, a 100K series resistor will double the voltage range and switching points. |
| [3] | A 5V power supply rail is provided at the POD connector. An optional 9V or 12V supply may also be available (depends on BitScope model to which it is connected). These may be used to supply low powered external circuits to which LP103W is connected. |
| [4] | The POD connector includes LEDs to indicate power availability and logic level on the first logic channel (independently of BitScope). |
E&OE
|
