BitScope Shop Online

USB cable for connecting a PC directly to a USB compatible Bitscope

SMD to Thru-Hole convertor PCB. Double sided, plated thru-hole, solder mask, silkscreen component overlay

DB-25 to DB-9 serial cable for use with any Serial BitScope

Double sided, plated thru-hole, solder mask, silkscreen component overlay

US power cable for use with PSU-03

100 MHz x 4 analog + 8 logic, 40 MS/s A/D, 128 kB x 5 buffer, 4 Mb/s ethernet built-in

Double sided, plated thru-hole, solder mask, silkscreen component overlay

Double sided, plated thru-hole, solder mask, silkscreen component overlay

Input: 120 VAC 60 Hz 9W, output: 10 VAC 1A, compact design, UL approved, for BS220 and earlier scopes

20 MHz / 115K upload, DSO modes, signal processing, variable aperture, min/max, decimation, centre clipping

Double sided, plated thru-hole, solder mask, silkscreen component overlay

EXAR 8786 based A/D module designed as a plug-in replacement for the original Motorola MC10319 chip

20 MHz / 625K upload, network and USB support, DSO modes, signal processing, upload pre-processing

High speed active DB-25 SmartPOD adapter with 40cm cable

BS445 Manuals and CD-ROM

BS325 Manuals and CD-ROM

BS120 Manuals and CD-ROM

Programmable waveform generator with 16 functions that plugs directly into Bitscope or for ICE via Logic POD-02

Low speed DB-25 SmartPOD adapter with 40cm cable

TI TLC5540 based A/D module designed as a plug-in replacement for the original Motorola MC10319 chip

For use with WavePOD (POD-04) or low speed logic. DB25, 8" cable and leads, LEDs, suitable for 5V CMOS/TTL

10 x 8" colored leads with hook clips suitable for use with a logic POD or direct connection with BitScope.

VM-220 and components to upgrade BS/BK-120 to use BNA-01 10BaseT ethernet to DB-25 serial convertor

SMD to Thru-Hole convertor PCB. Double sided, plated thru-hole, solder mask, silkscreen component overlay

18 pin PIC inc. clock, 20 pin IC socket, 20 x 13 prototype area, 20 x 2 header, regulated P/S, and 19K2 serial port

MCU emulator with 16/8 bit address/data bus, serial host port, FLASH and RAM memory and more

10 MHz 2:1 & 3MHz 1:5 (switchable), 10MΩ/5pF, ±13.8V CM, 12.5V peak. Differential, single-ended & AC coupled measurements. Includes cable but grabber probes NOT included (intended for use with your BS10 probes).

High speed active 3.3V/5V CMOS & TTL logic & analog buffered inputs, 100KΩ/5pF. Includes mini-hook test clips & LEDs.

Serial upgrade (BU220S) and network adaptor for VM-120 BitScopes. Enables BitScope networking for this model

USB to DB-25 convertor module for use with BS220 BitScopes

USB to DB-25 convertor module for use with BS300 BitScopes

10 MHz 2:1 & 3MHz 1:5 (switchable), 10MΩ/5pF, ±13.8V CM, 12.5V peak. Differential, single-ended & AC coupled measurements. Includes cable and a full set of mixed signal grabber probes (i.e. in addition to those that come with BS10).

VM-220 module and components to upgrade VM-120 Bitscopes to use BNA-03 USB adaptor (included)

VM-220 (PIC), Spock 220 (PLD), BitScope 220 and Logic POD PCBs, 75 MHz A/D and front/back panels

VM-220 (PIC), Spock 220 (PLD), BitScope 220 and Logic POD PCBs, 75 MHz A/D and front/back panels

VM-300 (PIC), Spock 300 (PLD), BitScope 300 and Logic POD PCBs, 100 MHz A/D, Synchro-300, front/back panels and DSO on CD-ROM

VM-300 (PIC), Spock 300 (PLD), BitScope 300 and Logic POD PCBs, 100 MHz A/D, Synchro-300, front/back panels and DSO on CD-ROM

Ethernet to DB-25 convertor module for use with BS300 BitScopes

4 node server in a 1RU 19" case for Raspberry Pi. Comprises 1 x Quattro Pi, metalwork, rack hardware, network switch and cabling. Accepts 7V to 48V connected via the power plates. Up to 3A (4A surge) power budget. Raspberry Pi and power supply sold separately.

25 MS/s Bitscope kit with a 115 kb/s host port, serial only VM-120 with DSO extensions and 75 MHz ADC-02

100 MHz x 10 channel (2 analog + 8 logic) 40 MS/s, 12 kB buffer, 5.0 Mb/s, includes DP01A active differential probe, 10 mixed signal grabber probes, USB cable, and software.

70 MHz x 9 channel (1 analog + 8 logic) 40 MS/s, 32 kB buffer, 1.0 Mb/s

25 MHz 200:1 50:1 20:1 (switchable), 4MΩ/1.2pF, 1.3kVpeak/kVrms, probe and clamp accessory kit.

10 node power supply and mounting system for Raspberry Pi. Comprises 5 x Duo Pi, metalwork and power wiring. Accepts 9V to 48V connected via the power plates. Up to 15A (20A surge) power budget. Insulating stand-offs included. Raspberry Pi, optional rack h

25 MS/s Bitscope kit with a 115 kb/s serial port, VM-120 with DSO extensions and 75 MHz ADC-02.

100 MHz analog + 8 logic, 40 MS/s A/D, 32 kB x 2 buffer, 1.25 Mb/s host port plus wavegen option

25 MS/s BitScope, 115 kb/s serial port, VM-120 firmware, 75 MHz A/D.

25 MS/s BitScope, 625 kb/s serial port, VM-220 firmware, 75 MHz A/D.

40 MS/s Bitscope kit with a 1.25 Mb/s host port, VM-300 with DSO extensions and 100 MHz A/D.

25 MS/s BitScope, 115 kb/s serial port, VM-120 firmware, 75 MHz A/D

25 MS/s Bitscope, 625 kb/s serial port with queued commands, VM-220, DSO extensions and 75 MHz A/D

100 MHz analog + 8 logic, 40 MS/s A/D, 32 kB x 2 buffer, 115 kb/s RS-232

20 node power supply and mounting system for Raspberry Pi. Comprises 5 x Quattro Pi, metalwork and power wiring. Accepts 9V to 48V connected via the power plates. Up to 15A (20A surge) power budget. Insulating stand-offs included. Raspberry Pi, network swi

25 MS/s BitScope Kit inc. 625 kb/s BNA-01 network adaptor, VM-220 DSO chip and 75 MHz ADC-02.

40 MS/s Bitscope Kit, 625 Mb/s BNA-01, VM-300, DSO extensions, 100 MHz A/D with programmable sample rates

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, plastic case.

40 MS/s Bitscope Kit, 1.25 Mb/s BNA-03, VM-300, DSO extensions, 100 MHz A/D with programmable sample rates

40 MS/s Bitscope, 1.25 Mb/s host port with queued commands, VM-300, DSO extensions and 100 MHz A/D

25 MS/s BitScope inc. 625 kb/s BNA-03 USB adaptor, VM-220 DSO chip and 75 MHz A/D

100 MHz analog + 8 logic, 40 MS/s A/D, 32 kB x 2 buffer, 115 kb/s RS-232 plus wavegen option

100 MHz x 10 channel (2 analog + 8 logic) 40 MS/s, 12 kB buffer, 5.0 Mb/s

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, alumium case, DSP waveform generator.

100 MHz analog + 8 logic, 40 MS/s A/D, 32 kB x 2 buffer, 1.25 Mb/s BNA-03 USB plus wavegen option

25 MS/s BitScope inc. 625 kb/s BNA-01 network adaptor, VM-220 DSO chip and 75 MHz A/D

100 MHz analog + 8 logic, 40 MS/s A/D, 64 kB buffer, 625 kb/s BNA-01 ethernet, built-in AWG

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, solid alumium case

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, 1.2 Mb/s, no waveform generator

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, 1.0 Mb/s, waveform generator

100 MHz x 10 channel (2 analog + 8 logic) 40 Ms/S, 1MB buffer, instant replay waveform generator.

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, 1.2 Mb/s

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, 1.0 Mb/s, waveform generator

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, integrated waveform generator

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, integrated waveform generator

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, 1.2 Mb/s, waveform generator

100 MHz x 10 channel (2 analog + 8 logic) 40 Ms/S, 1MB buffer, instant replay waveform generator

100 MHz x 10 channel (2 analog + 8 logic) 40 Ms/S, 1MB buffer, instant replay waveform generator

100 MHz x 10 channel (2 analog + 8 logic) 40 Ms/S, 1MB buffer, instant replay waveform generator

100 MHz x 12 channel (4 analog + 8 logic), 40 MS/s, 640 kB buffer, ethernet host interface.

100 MHz x 4 analog + 8 logic, 40 MS/s A/D, 128 kB x 5 buffer, 1.25 Mb/s ethernet built-in

100 MHz x 4 analog + 8 logic, 40 MS/s A/D, 128 kB x 5 buffer, 4 Mb/s ethernet built-in

100 MHz x 4 analog + 8 logic, 40 MS/s A/D, 128 kB x 5 buffer, 4 Mb/s ethernet built-in

100 MHz x 12 channel (4 analog + 8 logic), 40 MS/s, 640 kB buffer, ethernet host interface