BitScope BS440E

This is our board level industrial networked data acquisition system.

Analog Inputs [1]	4 x BNC + 4 x POD
Logic Inputs	8 x POD
Analog Bandwidth [2]	100 MHz
Converter Bandwidth [3]	75 ~ 100 MHz
Input Impedance	1M/20 pF (standard oscilloscope)
Input Voltage Range (+/-)	25mV ~ 5.52V (x1) & 250mV ~ 55.2V (x10)
Analog Sensitivity	200uV ~ 50mV
Maximum Sensitivity [4]	30 uV
Fast Sample Rates	4, 5, 10, 13.5, 20, 25, 33, 40 MS/s
Slow Sample Rates [5]	4 kHz ~ 1 MHz (slow) & <1 Hz (burst mode)
Channel Buffer Depth	128 kS (for each analog and logic channel)
Resolution (Converter)	TLC5540 8 bit converter with 6.8 ~ 7.6 ENOB
Maximum Resolution [6]	12.5 ENOB
Glitch Capture	25 nS
BitScope Digital Trigger	8 bit combinatorial on logic or A/D output.
High Speed Analog Trigger	YES
Logic Interface	1 x DB25 (inc. logic, analog, data and power)
Data Upload Speed (Max)	1.25 Mb/s
Standard PC Software	BitScope DSO
Power Requirement [7]	12VDC 1 A
Operating Temperature	0ºC to 50ºC
Storage Temperature	-20°C to +60°C
Size (mm)	210x200x55

[1]	BS440 has 4 analog channels each of which can select from a BNC or POD source.
[2]	Analog bandwidth refers to the bandwidth of the analog input circuitry.
[3]	The A/D converter on each channel has a bandwidth is 75 MHz. BS440N includes compensation for this converter to achieve 100 MHz bandwidth throughout.
[4]	Specifies minimum viewable voltage with resolution enhancement.
[5]	In addition to the fast sample rates, a wide range of "slow clock" and "burst clock" rates are supported (to below 1 Hz). Burst clocking also supports further increased bit resolution (ENOB).
[6]	Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled.
[7]	Includes Universal (110-240V) power adaptor and US cable as standard.

Product Information