BitScope Shop Online

DB-25 to DB-9 serial cable for use with any Serial BitScope

Flat CAT-5 Ethernet cable for inteconnecting BitScope Blade boards in a Blade Server Rack.

Double sided, plated thru-hole, solder mask, silkscreen component overlay

US power cable for use with PSU-03

In-Line BNC adapter for BitScope Micro. Includes 6 logic inputs and switchable waveform and clock generator outputs.

Universal AC adapter suitable for powering BitScope Blade. Input 100V to 240V at 50 to 60 Hz, Output: 12 VDC at 800mA, center positive.

SMD to Thru-Hole convertor PCB. Double sided, plated thru-hole, solder mask, silkscreen component overlay

18 pin PIC inc. clock, 20 pin IC socket, 20 x 13 prototype area, 20 x 2 header, regulated P/S, and 19K2 serial port

10 x 8" colored leads with grabber clips suitable for use with a logic POD or direct connection with BitScope.

Single node power supply and mounting system for Raspberry Pi, optional Display and HAT. Accepts 9V to 48V including UPS, PoE or 12V/24V battery power. Up to 3A (4A surge) power budget. Includes dual USB power sockets and auxilliary peripheral power. Raspb

High speed active 3.3V/5V CMOS & TTL logic & analog buffered inputs, 100KΩ/5pF. Includes mini-hook test clips & LEDs.

High speed active 3.3V/5V CMOS & TTL logic & analog buffered inputs, 100KΩ/5pF. Includes mini-grabber test clips & LEDs.

BitGen integrated waveform and timing generator solution for USB BitScope 100. Pre-installed if purchased with BS100U

20 MHz bandwidth x 8 channel (2 analog + 6 digital) mixed signal scope and waveform generator. Samples to 40 MS/s, 12 kB buffer, 3.0 Mb/s. Light weight, water resistant. Includes 10 mixed signal test probes, USB cable and software.

20 MHz bandwidth x 8 channel (2 analog + 6 digital) mixed signal scope and waveform generator. Samples to 40 MS/s, 12 kB buffer, 3.0 Mb/s. Light weight, water resistant. 10 mixed signal test probes, USB cable, Tom Thumb Port Adapter (MP02A) and software.

The Ultimate Raspberry Pi Cluster Solution. Use stand-alone, in clusters or racks. Raspberry Pi 4B, 3B+, 3B, 2B or Zero. 12V~28V (unregulated) input. 5V @ 50W (peak, regulated) output. Active Cooling System. Cluster Bus & Control Plane. Node Power, Bootstrap & Shut-Down. Power, Voltage & Current Monitoring. Power Good & Load. Battery Backed UPS.

4 node server in a 1RU 19" case for Raspberry Pi. Comprises 1 x Quattro Pi, metalwork, rack hardware, network switch and cabling. Accepts 9V to 48V connected via the power plates. Up to 3A (4A surge) power budget. Raspberry Pi and power supply sold separat

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 128 kB buffer, plastic case.

100 MHz analog + 8 logic, 40 MS/s A/D, 64 kB buffer, 625 kb/s BNA-01 ethernet, built-in AWG

100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, integrated waveform generator