BitScope BS310N

Network BitScope 310 (Ethernet, Isolated)
Network BitScope 310
Product Summary
Order Code BS310N
Description 100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, integrated waveform generator
Comment Ethernet, Isolated.
Quantity USD (US Dollar)
1+ $ 655.00

Product Information

The BS310N model has been superceded by BS325N.

BS325N offers new features and improved performance but remains compatible with BS310N.

BS310N is a high performance networked Mixed Signal Scope and Data Acquisition device.

BS310N is backward compatible with BS300N which it replaces.

It is functionally equivalent to our USB model BS310U. It has 4 times as much capture buffer, a software switchable x10 and x50 analog input multiplier and AC/DC coupling, switchable 50 ohm termination compared to its predecessor (BS300N).

A flexible networked ethernet host interface supporting Intranet or Internet access is built-in.

Feature Specification
Analog Inputs [1] 2 x BNC + 2 x POD
Logic Inputs 8 x POD
Analog Bandwidth [2] 100 MHz
Input Impedance 1M/20 pF (BNC), 100K/5 pF (POD)
Input Voltage Range (+/-) 513mV ~ 10.8V & 5.13V ~ 108V (with x10 probe)
Input Multipler Gain [3] x10 and x50
Analog Sensitivity 2mV ~ 40mV (x1)
Maximum Sensitivity [4] 300 uV (Time), 70uV (Freq), 10uV (Mean)
Fast Sample Rates 4, 5, 10, 13.5, 20, 25, 33, 40 MS/s
Slow Sample Rates [5] 4 kHz ~ 1 MHz (slow) & <1 Hz (burst mode)
Channel Buffer Depth 128 kS (analog), 128 kS (logic)
Resolution (Converter) TLC5540 8 bit converter with 6.8 ~ 7.6 ENOB
Maximum Resolution [6] 13.5 ENOB
Glitch Capture 25 nS
BitScope Digital Trigger 8 bit combinatorial on logic or A/D output.
High Speed Analog Trigger YES
Waveform Generator [7] 10 MS/s (switchable through BNC Channel B)
Analog Interface 2 x BNC and 2 x POD
Logic Interface 1 x DB25 (inc. logic, analog, data and power)
Data Upload Speed (Max) 1.0 Mb/s
PC Host Interface Ethernet (10/100BaseT, CAT5)
Standard PC Software BitScope DSO
Power Requirement [8] 12VDC 500 mA
Operating Temperature 0ºC to 50ºC
Storage Temperature -20°C to +60°C
Size (WxHxD) 150x55x100 mm
[1] Analog capture for each channel is selectable from BNC or POD individually.
[2] Input bandwidth refers to the bandwidth of the analog input circuitry and the compensated A/D converter in all but the most sensitive input range.
[3] User selectable analog input multipliers with x10 and x50 gain for use with low level signals or when input bandwidth limiting is required.
[4] Minimum measurable peak-to-peak sinusoidal waveform voltage when both resolution enhancement and input multiplier are enabled, when viewed as a waveform (Time) or viewed as a spectrum (Freq) and the minimum measurable average DC voltage (Mean).
[5] In addition to the fast sample rates, a wide range of "slow clock" and "burst clock" rates are supported (to below 1 Hz). Burst clocking also supports further increased bit resolution (ENOB).
[6] Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled.
[7] The waveform generator is standard with BS310N and it supports concurrent waveform generation (BNC channel B) and waveform capture (BNC channel A).
[8] Includes UPP-02 Universal AC adaptor and US power cable as standard.

Analog and logic probes are sold seperately.