||100 MHz x 9 channel (2 analog or 8 logic + 1 analog) 40 MS/s, 256 kB buffer, integrated waveform generator
The BS310N model has been superceded by BS325N.
BS325N offers new features and improved performance but remains compatible with BS310N.
BS310N is a high performance networked Mixed Signal Scope and Data Acquisition device.
BS310N is backward compatible with BS300N which it replaces.
It is functionally equivalent to our USB model BS310U. It has 4 times as much capture buffer, a software switchable x10 and x50 analog input multiplier and AC/DC coupling, switchable 50 ohm termination compared to its predecessor (BS300N).
A flexible networked ethernet host interface supporting Intranet or Internet access is built-in.
|Analog Inputs 
||2 x BNC + 2 x POD
||8 x POD
|Analog Bandwidth 
||1M/20 pF (BNC), 100K/5 pF (POD)
|Input Voltage Range (+/-)
||513mV ~ 10.8V & 5.13V ~ 108V (with x10 probe)
|Input Multipler Gain 
||x10 and x50
||2mV ~ 40mV (x1)
|Maximum Sensitivity 
||300 uV (Time), 70uV (Freq), 10uV (Mean)
| Fast Sample Rates
||4, 5, 10, 13.5, 20, 25, 33, 40 MS/s
|Slow Sample Rates 
||4 kHz ~ 1 MHz (slow) & <1 Hz (burst mode)
|Channel Buffer Depth
||128 kS (analog), 128 kS (logic)
||TLC5540 8 bit converter with 6.8 ~ 7.6 ENOB
|Maximum Resolution 
|BitScope Digital Trigger
||8 bit combinatorial on logic or A/D output.
|High Speed Analog Trigger
|Waveform Generator 
||10 MS/s (switchable through BNC Channel B)
||2 x BNC and 2 x POD
||1 x DB25 (inc. logic, analog, data and power)
|Data Upload Speed (Max)
|PC Host Interface
||Ethernet (10/100BaseT, CAT5)
|Standard PC Software
|Power Requirement 
||12VDC 500 mA
||0ºC to 50ºC
||-20°C to +60°C
| ||Analog capture for each channel is selectable from BNC or POD individually.|
| ||Input bandwidth refers to the bandwidth of the analog input circuitry and the compensated A/D converter in all but the most sensitive input range.|
| ||User selectable analog input multipliers with x10 and x50 gain for use with low level signals or when input bandwidth limiting is required. |
| ||Minimum measurable peak-to-peak sinusoidal waveform voltage when both resolution enhancement and input multiplier are enabled, when viewed as a waveform (Time) or viewed as a spectrum (Freq) and the minimum measurable average DC voltage (Mean). |
| ||In addition to the fast sample rates, a wide range of "slow clock" and "burst clock" rates are supported (to below 1 Hz). Burst clocking also supports further increased bit resolution (ENOB). |
| ||Specifies the maximum effective number of bits (ENOB) achieveable with resolution enhancement enabled.|
| ||The waveform generator is standard with BS310N and it supports concurrent waveform generation (BNC channel B) and waveform capture (BNC channel A).|
| ||Includes UPP-02 Universal AC adaptor and US power cable as standard.|
Analog and logic probes are sold seperately.