||In-Line BNC adapter for BitScope Micro. Includes 6 logic inputs and switchable waveform and clock generator outputs.
||for Bitscope Micro.
MP02A is an in-line BNC adapter for BitScope Micro. It allows the use of industry standard oscilloscope probes. It also supports simultaneous use of the logic inputs and connection to the waveform and clock generator outputs. The adapter allows 1:1, 10:1, 100:1 and other standard attenuating oscilloscope probes to be used as well as current, differential or any other BNC terminated sensor designed for use with 1MΩ/20pF oscilloscope inputs.
The BNC socket is supplied with ring nuts and washers so MP02A can be bench mounted. The logic, waveform generator and clock signals appear on the 10-pin header mounted behind the BNC socket so anything BitScope Micro can do can also be done when the adapter is connected. A terminator is included to select from CHA, the waveform generator or Logic Channel 4 as the signal used for BNC channel. Read More...
FC10A | E&OE
|Analog Inputs (Standard Probe) ||1|
|Analog Inputs (Pin Header) ||2|
|Logic Inputs (3.3V/5V) ||6|
|Comparator Channels ||2 (via analog inputs)|
|Waveform Generator ||1 (via L4)|
|Clock Generator ||1 (via L5)|
|Input Impedance (Analog) ||1M Ω / 20pF|
|Input Impedance (Digital) ||100k Ω / 5pF|
|Voltage Range (Direct) ||-7.5 V ~ +10.8 V (1:1 probe)|
|Voltage Range (Scaled) ||-75 V ~ +108 V (10:1 probe)|
|Device Connection ||IDC-10 (Micro Port)|
|Power Requirement ||None|
|Operating Temperature ||0 °C to 40 °C|
|Storage Requirements ||-40 °C ~ +40 °C / 5 % ~ 95 % RH|
|Dimensions (W x D x H) ||20 x 60 x 20 mm|
|Weight (Net) ||16g|